Our Sebo Automatic X4 Clear Vacuum (See-Through)

To clean the dust canister, you first want to remove the cyclones so that you can give it a deep clean.

Make sure your vacuum is switched off and unplugged before attempting to replace the belt!.As the vacuum belt turns the brush bar, you’ll need to access this area.

Start by tilting the vacuum onto its back, then removing the base plate.. You’ll probably need a screwdriver to remove the plate and get full access to the brushroll area..Step 3: Remove the Brush Bar (if Necessary) and Broken Belt.Once the base plate is removed, you should be able to access both the brushroll and the belt..

But before you start the replacement process, look carefully at how the belt attaches to the brush roll.Is it held in place by tension alone?

Or is there something else that’s holding the belt in position?

Does the brush need to be removed?we recommend cleaning the dust cup every 1-2 months.

This keeps the dust cup clear and helps remove any build-up before it can cause issues.. You may need to clean your dust cup more frequently if it starts to cause a bad odour or becomes covered in grime though..Shark recommends cleaning pre-motor filters once per month and the post-motor filter once per year.. How to Clean a Shark Cordless Dust Cup.

Step 1: Empty the Dust Cup.Before cleaning the dust cup, it’s important to get rid of all the loose debris and hair inside.. As you’re going to be doing a deeper clean, fully remove the dust cup by pressing the button with an arrow on it and tilting the cup away from the main body.